Visit The Following Page

 

What are your concepts about How to Troubleshoot and Repair an Electric Water Heater?

Lots of modern homes use an electric hot water heater for their heating system, as a result of its convenience and simplicity of use. However, much like any other electric home appliances, troubles may develop with its usage, suddenly. It can be truly discouraging to get up to a cold shower instead of a hot one or having your bathroom with water that isn't warm enough and even too warm. Whatever the situation might be, hot water heater troubles can be quite nerve-racking. Fortunately, we've made a list of feasible solutions to your hot water heater issues. There are a variety of factors that can create a number of these issues, it could be a concern with the power supply, the electric heating element, or the thermostat. Prior to doing anything, guarantee you switch off the main power supply for safety and security. Whatever the problem is, getting it repaired should not position too much of a problem if you comply with these actions:

 

Call An Expert:

If after changing all damaged components and resetting your temperature level, the hot water heater still isn't functioning, you may require to speak to a professional plumber for a professional point of view. The trouble with your heating unit could be that the hot and cold taps have actually been switched or it might be undersized for the quantity of warm water needed in your house. Whatever the case might be, an expert plumber would certainly help solve the issue.

 

Examine Your Power Supply:

As basic as this may appear, it is very essential. Without ample power, your hot water heater will certainly not work. So the first thing to do when your water instantly stops working is to confirm that it isn't a power problem. Check if the fuse is blown out or the breaker tripped. If the circuit breaker is the issue, just turn it off and on again. Replace any kind of busted or worn-out fuse. Evaluate the appliance with power after these modifications to see if it's currently functioning.

 

Inspect Your Thermostat:

If your hot water heater still isn't working or the water coming out isn't warm enough, you may need to inspect the temperature settings on your upper thermostat. Ensure the circuit breaker is switched off prior to doing anything. Open up the gain access to panel and also press the red switch for temperature reset over the thermostat. This must help heat up the water. Turn the circuit breaker back on and also check if the problem has actually been settled.

 

Examine the Heating Element in the Hot Water Heater:

If it's not a power problem, after that attempt checking out your burner if it is still working. Examine each of your burner to make sure the problem isn't with any one of them. If any one of them is malfunctioning, change that part and afterwards inspect whether the warm water is back on.

 

Final thought

Water heater issues are not constantly major. A number of them result from minor issues like a blown fuse or damaged heating element. Changing the defective components must suffice. Nonetheless, if you are still not able to solve the trouble, give a call to your nearby plumber to come to get it taken care of.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

As a keen reader on Hot Water Heater Repair, I thought sharing that piece of content was smart. Be sure to set aside a second to promote this blog entry if you enjoyed it. Thanks a lot for taking the time to read it.

Quality commitment here.